These files all contain functions whose prototypes are in header files,
so make sure those header files are included.

Change-Id: I0189a1550bf90d4a0b87dcef9f8a8449590cc9d7
Signed-off-by: Jacob Garber <jgarber1@ualberta.ca>
Reviewed-on: https://review.coreboot.org/c/flashrom/+/33668


Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Nico Huber <nico.h@gmx.de>

None of these functions are used outside of the files they are defined
in, so make them all static.

Change-Id: Ie9cbe12d289bcedacf2f1bf483ae64ef8039ccc1
Signed-off-by: Jacob Garber <jgarber1@ualberta.ca>
Reviewed-on: https://review.coreboot.org/c/flashrom/+/33667


Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: HAOUAS Elyes <ehaouas@noos.fr>
Reviewed-by: Nico Huber <nico.h@gmx.de>

Instead of just "Probing for ENE KB9012 (EDI), 128 kB:", lets print
some debug info - like it is currently being printed for other chips:

Probing for ENE KB9012 (EDI), 128 kB: edi_chip_probe: hwversion 0xc3, ediid 0x04
Found ENE flash chip "KB9012 (EDI)" (128 kB, SPI) on ch341a_spi.

Change-Id: Id8e62bc9f6785b4bf0be0aaf0f74c8120d77c0d4
Signed-off-by: Mike Banon <mikebdp2@gmail.com>
Signed-off-by: Paul Kocialkowski <contact@paulk.fr>
Reviewed-on: https://review.coreboot.org/23261


Reviewed-by: Nico Huber <nico.h@gmx.de>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>

ENE chips enable EDI by detecting a clock frequency between 1 MHz and 8 MHz.
In many cases, the chip won't be able to both detect the clock signal and
serve the associated request at the same time.

Thus, a dummy read has to be added to ensure that EDI is enabled and
operational starting from the next request.

Change-Id: I69ee71674649cd8ba4fc635f889cb39a1cd204b9
Signed-off-by: Mike Banon <mikebdp2@gmail.com>
Signed-off-by: Paul Kocialkowski <contact@paulk.fr>
Reviewed-on: https://review.coreboot.org/23260


Reviewed-by: Nico Huber <nico.h@gmx.de>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>

The ENE Embedded Debug Interface (EDI) is a SPI-based interface for
accessing the memory of ENE embedded controllers.

The ENE KB9012 EC is an embedded controller found on various laptops
such as the Lenovo G505s. It features a 8051 microcontroller and
has 128 KiB of internal storage for program data.

EDI can be accessed on the KB9012 through pins 59-62 (CS-CLK-MOSI-MISO)
when flash direct access is not in use. Some firmwares disable EDI at runtime
so it might be necessary to ground pin 42 to reset the 8051 microcontroller
before accessing the KB9012 via EDI.

The example of flashing KB9012 at Lenovo G505S laptop could be found here:
http://dangerousprototypes.com/docs/Flashing_KB9012_with_Bus_Pirate



Change-Id: Ib8b2eb2feeef5c337d725d15ebf994a299897854
Signed-off-by: Mike Banon <mikebdp2@gmail.com>
Signed-off-by: Paul Kocialkowski <contact@paulk.fr>
Reviewed-on: https://review.coreboot.org/23259


Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Nico Huber <nico.h@gmx.de>