Replace log lines with the prefix formatter '%s: ..' and pass
'__func__' to the printers so that errors are prefixed with the
function from which they originated.

BUG=b:154285774
BRANCH=none
TEST=build success

Change-Id: If3205d8e453cfcd37f725b4fd135fe1221c913c0
Signed-off-by: Shiyu Sun <sshiyu@chromium.org>
Reviewed-on: https://review.coreboot.org/c/flashrom/+/40901


Reviewed-by: Edward O'Callaghan <quasisec@chromium.org>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>

The ChromiumOS flashrom fork has since const'ify flashctx
in a few places. This aligns the function signatures to
match with downstream to ease forward porting patches
out of downstream back into mainline flashrom.

This patch is minimum viable alignment and so feedback is
welcome.

Change-Id: Iff6dbda13cb0d941481c0d204b9c30895630fbd1
Signed-off-by: Edward O'Callaghan <quasisec@google.com>
Reviewed-on: https://review.coreboot.org/c/flashrom/+/40324


Reviewed-by: Angel Pons <th3fanbus@gmail.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>

Change-Id: I0675b467d7b0d24626a336033668bf80bfeeb815
Signed-off-by: Edward O'Callaghan <quasisec@google.com>
Reviewed-on: https://review.coreboot.org/c/flashrom/+/40679


Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-by: HAOUAS Elyes <ehaouas@noos.fr>

Clean up some confusion of implicit copies by indirection.
This allows the caller of register_spi_master() to have it's
internal state in the expected way.

Also add an error when the mpu reset fails on init.

BUG=b:148746232,b:153027771,b:140394053
BRANCH=none
TEST=builds

Signed-off-by: Edward O'Callaghan <quasisec@google.com>
Change-Id: I66ba4ffeb696309b8ad5b5ba58650630e8feefa9
Reviewed-on: https://review.coreboot.org/c/flashrom/+/40470


Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>

This adds support for the Parade lspcon usb-c to HDMI protocol
translater part that is i2c-controlled. The support allows the
host to reach the SPI ROM that hangs off the part where it
stores its firmware.

Usage is as follows:
	flashrom -p lspcon_i2c_spi:bus=X
	where X is the bus number.

BUG=b:148746232
BRANCH=none
TEST=tested with following commands, read/write/erase works good.
	flashrom -p lspcon_i2c_spi:bus=7 -r /tmp/foo;
	flashrom -p lspcon_i2c_spi:bus=7 -E;
	flashrom -p lspcon_i2c_spi:bus=7 -w /tmp/foo;

Change-Id: I039e683252cfaf1ffef8694a3e8081b1b6b944f7
Signed-off-by: Shiyu Sun <sshiyu@chromium.org>
Reviewed-on: https://review.coreboot.org/c/flashrom/+/39687


Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Edward O'Callaghan <quasisec@chromium.org>