Change-Id: I7bfc339673cbf5ee2d2ff7564c4db04ca088d0a4
Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr>
Reviewed-on: https://review.coreboot.org/25381


Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Nico Huber <nico.h@gmx.de>

This includes PMC Pm49*, SST 49LF00*, ST M50* and Winbond W39* families.
The erase and write test status bits of all affected chips have been reset.

Corresponding to flashrom svn r1833.

Signed-off-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006@gmx.net>
Signed-off-by: Stefan Tauner <stefan.tauner@alumni.tuwien.ac.at>
Acked-by: Stefan Tauner <stefan.tauner@alumni.tuwien.ac.at>

W39F010 is a 128kB parallel 5V flash chip, 16k bootblocks.
W39L010 is a 128kB parallel 3.3V flash chip, 8k bootblocks.
W39L020 is a 256kB parallel 3.3V flash chip, 64k/16k bootblocks.

The W39F010 code was tested with a satasii programmer. The first write
attempt after an erase returned with verify failure, but the second
write attempt was succesful:
http://paste.flashrom.org/view.php?id=1418



Corresponding to flashrom svn r1620.

Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Acked-by: Stefan Tauner <stefan.tauner@alumni.tuwien.ac.at>

All the driver conversion work and cleanup has been done by Stefan.
flashrom.c and cli_classic.c are a joint work of Stefan and Carl-Daniel.

Corresponding to flashrom svn r1579.

Signed-off-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006@gmx.net>
Signed-off-by: Stefan Tauner <stefan.tauner@alumni.tuwien.ac.at>
Acked-by: Stefan Tauner <stefan.tauner@alumni.tuwien.ac.at>
Acked-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006@gmx.net>

Chip features an optional permanent boot block write protection.

Corresponding to flashrom svn r1522.

Signed-off-by: David Borg <borg.db@gmail.com>
Signed-off-by: Stefan Tauner <stefan.tauner@alumni.tuwien.ac.at>
Acked-by: Uwe Hermann <uwe@hermann-uwe.de>

All programmer access function prototypes except init have been made
static and moved to the respective file.

A few internal functions in flash chip drivers had chipaddr parameters
which are no longer needed.

The lines touched by flashctx changes have been adjusted to 80 columns
except in header files.

Corresponding to flashrom svn r1474.

Signed-off-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006@gmx.net>
Acked-by: Michael Karcher <flashrom@mkarcher.dialup.fu-berlin.de>

Struct flashchip is used only for the flashchips array and for
operations which do not access hardware, e.g. printing a list of
supported flash chips.

struct flashctx (flash context) contains all data available in
struct flashchip, but it also contains runtime information like
mapping addresses. struct flashctx is expected to grow additional
members over time, a prime candidate being programmer info.
struct flashctx contains all of struct flashchip with identical
member layout, but struct flashctx has additional members at the end.

The separation between struct flashchip/flashctx shrinks the memory
requirement of the big flashchips array and allows future extension
of flashctx without having to worry about bloat.

Corresponding to flashrom svn r1473.

Signed-off-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006@gmx.net>
Acked-by: Michael Karcher <flashrom@mkarcher.dialup.fu-berlin.de>

Push those changes forward where needed to prevent new sign
conversion warnings where possible.

Corresponding to flashrom svn r1470.

Signed-off-by: Stefan Tauner <stefan.tauner@alumni.tuwien.ac.at>
Acked-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006@gmx.net>

This is related to the spi split patch as discussed in:
http://www.flashrom.org/pipermail/flashrom/2010-February/thread.html#2364


the old commit (r914) log notes:
"Some of the spi programmer drivers required chipdrivers.h, needs fixing later: it87spi.c
  ichspi.c   sb600spi.c   wbsio_spi.c   buspirate_spi.c   ft2232spi.c   bitbang_spi.c   dediprog.c"

there still remain a few cases where chipdrivers.h is needed:
dediprog.c (spi_read_chunked and spi_write_chunked)
it87spi.c (due to spi_write_enable and spi_read_status_register)
wbsio_spi.c (spi_programmer registration only)

besides that, there are also non-spi files that do not need it.
also, add flash.h to chipdrivers.h because it uses some types of it
and remove flashchips.h from print.c

Corresponding to flashrom svn r1414.

Signed-off-by: Stefan Tauner <stefan.tauner@alumni.tuwien.ac.at>
Acked-by: Stefan Tauner <stefan.tauner@alumni.tuwien.ac.at>

- mark EN25F80 as fully tested
  http://www.flashrom.org/pipermail/flashrom/2011-July/007329.html
- mark W25Q16 as fully tested
  http://www.flashrom.org/pipermail/flashrom/2011-July/007151.html
- mark W39V040A as fully tested
  http://www.flashrom.org/pipermail/flashrom/2011-July/007161.html
- mark Pm25LV040 as fully tested
  reported by TL1 on IRC
- mark W49F002U/N as fully tested
  http://paste.flashrom.org/view.php?id=733g
- mark W39V080FA as fully tested
  http://www.flashrom.org/pipermail/flashrom/2011-July/007225.html

- add ASUS P4S533-X to the list of supported boards
  http://www.flashrom.org/pipermail/flashrom/2011-July/007200.html
- add ASUS M4A785TD-V EVO to the list of supported boards
  http://www.flashrom.org/pipermail/flashrom/2011-July/007329.html
- add GA-945PL-S3P (rev. 6.6) to the list of supported boards
  reported by TL1 on IRC
- add MS-7142 (K8MM-V) to the list of supported boards
  http://www.flashrom.org/pipermail/flashrom/2011-July/007161.html
- add MS-7369 (K9N Neo V2) to the list of supported boards
  http://www.flashrom.org/pipermail/flashrom/2011-July/007181.html
- add X7DBT-INF to the list of supported boards
  http://www.flashrom.org/pipermail/flashrom/2011-July/007225.html

- mark SiS 645DX chipset enable as OK
  http://www.flashrom.org/pipermail/flashrom/2011-July/007200.html
- mark SiS 651 chipset enable as OK
  http://paste.flashrom.org/view.php?id=733



- move intel_ich_gpio34_raise to the correct line(s)
- change the output of unlock_w39_fwh_block from 0x%x to 0x%08x
- fix output for untested chipset enables (missing space)
- reorder the board enable in print.c entry for GA-8SIMLH added in r1385.
- minor other fixes

- fix output for multiple found flash chips by adding quotes and commas
- similarly fix output of "Found/Assuming" chips

Corresponding to flashrom svn r1386.

Signed-off-by: Stefan Tauner <stefan.tauner@alumni.tuwien.ac.at>
the last two points are
Acked-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006@gmx.net>
everything else is
Acked-by: Stefan Tauner <stefan.tauner@alumni.tuwien.ac.at>

Corresponding to flashrom svn r1268.

Signed-off-by: Michael Karcher <flashrom@mkarcher.dialup.fu-berlin.de>
Acked-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006@gmx.net>

Add code for the unlocking (erasing/writing) of Winbond W39V040FB
chips, enabling erasing/writing this type of chip.

Corresponding to flashrom svn r1248.

Signed-off-by: Idwer Vollering <vidwer@gmail.com>
Acked-by: Michael Karcher <flashrom@mkarcher.dialup.fu-berlin.de>

Print lock status for all supported Winbond W39* chips:
W39V040A, W39V040B, W39V040C, W39V040FA, W39V040FB, W39V040FC,
W39V080A, W39V080FA, W39V080FA (dual mode).

Fill in correct probe timing for Winbond W39V040C and W39V080FA.

Please note that the W39V040B/W39V040FB pair has identical IDs,
identical read/write/erase, but locking differs. Same applies to
W39V040C/W39V040FC. This causes double detection on chipsets which
support LPC and FWH, making flashing more difficult because the user
has to select the correct chip. This is called the evil twin problem.
A better evil twin handling (patch available) will resolve that problem.

Corresponding to flashrom svn r1245.

Signed-off-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006@gmx.net>
Acked-by: Michael Karcher <flashrom@mkarcher.dialup.fu-berlin.de>