Select Git revision
Search by author
- Any Author
- authors
-
Angus Ainslie
angus.ainslie
-
Eric Kuzmenko
eric.kuzmenko
-
Evangelos Ribeiro Tzaras
evangelos.tzaras
-
Francois Techene
francois.techene
-
Guido Gunther
guido.gunther
-
JC Staudt
jcstaudt
-
Jonathon Hall
jonathon.hall
-
Julian Sparber
julian.sparber
-
Martin Kepplinger
martin.kepplinger
-
Mohammed Sadiq
mohammed.sadiq
-
Richard Kolla
richard.kolla
-
Sam Hewitt sam.hewitt
-
Sebastian Krzyszkowiak
sebastian.krzyszkowiak
- Jan 05, 2022
-
-
Jianguo Wu authored
[ Upstream commit add25d6d ] $rvs -> $rcv Fixes: a062260a ("selftests: net: add UDP GRO forwarding self-tests") Signed-off-by:
-
wujianguo authored
[ Upstream commit 9c1952ae ] udpgso_bench_tx call setup_sockaddr() for dest address before parsing all arguments, if we specify "-p ${dst_port}" after "-D ${dst_ip}", then ${dst_port} will be ignored, and using default cfg_port 8000. This will cause test case "multiple GRO socks" failed in udpgro.sh. Setup sockaddr after parsing all arguments. Fixes: 3a687bef ("selftests: udp gso benchmark") Signed-off-by:
-
Nikolay Aleksandrov authored
[ Upstream commit f83a112b ] As reported[1] if startup query interval is set too low in combination with large number of startup queries and we have multiple bridges or even a single bridge with multiple querier vlans configured we can crash the machine. Add a 1 second minimum which must be enforced by overwriting the value if set lower (i.e. without returning an error) to avoid breaking user-space. If that happens a log message is emitted to let the admin know that the startup interval has been set to the minimum. It doesn't make sense to make the startup interval lower than the normal query interval so use the same value of 1 second. The issue has been present since these intervals could be user-controlled. [1] https://lore.kernel.org/netdev/e8b9ce41-57b9-b6e2-a46a-ff9c791cf0ba@gmail.com/ Fixes: d902eee4 ("bridge: Add multicast count/interval sysfs entries") Reported-by:
-
Nikolay Aleksandrov authored
[ Upstream commit 99b40610 ] As reported[1] if query interval is set too low and we have multiple bridges or even a single bridge with multiple querier vlans configured we can crash the machine. Add a 1 second minimum which must be enforced by overwriting the value if set lower (i.e. without returning an error) to avoid breaking user-space. If that happens a log message is emitted to let the administrator know that the interval has been set to the minimum. The issue has been present since these intervals could be user-controlled. [1] https://lore.kernel.org/netdev/e8b9ce41-57b9-b6e2-a46a-ff9c791cf0ba@gmail.com/ Fixes: d902eee4 ("bridge: Add multicast count/interval sysfs entries") Reported-by:
-
Gal Pressman authored
[ Upstream commit 992d8a4e ] In case of an error in mlx5e_set_features(), 'netdev->features' must be updated with the correct state of the device to indicate which features were updated successfully. To do that we maintain a copy of 'netdev->features' and update it after successful feature changes, so we can assign it to back to 'netdev->features' if needed. However, since not all netdev features are handled by the driver (e.g. GRO/TSO/etc), some features may not be updated correctly in case of an error updating another feature. For example, while requesting to disable TSO (feature which is not handled by the driver) and enable HW-GRO, if an error occurs during HW-GRO enable, 'oper_features' will be assigned with 'netdev->features' and HW-GRO turned off. TSO will remain enabled in such case, which is a bug. To solve that, instead of using 'netdev->features' as the baseline of 'oper_features' and changing it on set feature success, use 'features' instead and update it in case of errors. Fixes: 75b81ce7 ("net/mlx5e: Don't override netdev features field unless in error flow") Signed-off-by:
-
Christophe JAILLET authored
[ Upstream commit 140c7bc7 ] When allocated, this bitmap is not initialized. Only the first bit is set a few lines below. Use bitmap_zalloc() to make sure that it is cleared before being used. Fixes: 6461b446 ("ionic: Add interrupts and doorbells") Signed-off-by:
-
Nicholas Kazlauskas authored
[ Upstream commit 33735c1c ] [Why] We'll exit optimized power state to do link detection but we won't enter back into the optimized power state. This could potentially block s2idle entry depending on the sequencing, but it also means we're losing some power during the transition period. [How] Hook up the handler like DCN21. It was also missed like the exit_optimized_pwr_state callback. Fixes: 64b1d0e8 ("drm/amd/display: Add DCN3.1 HWSEQ") Tested-by:
-
Nicholas Kazlauskas authored
[ Upstream commit a07f8b99 ] [Why] Otherwise SMU won't mark Display as idle when trying to perform s2idle. [How] Mark the bit in the dcn31 codepath, doesn't apply to older ASIC. It needed to be split from phy refclk off to prevent entering s2idle when PSR was engaged but driver was not ready. Fixes: 118a3315 ("drm/amd/display: Add DCN3.1 clock manager support") Tested-by:
-
James McLaughlin authored
[ Upstream commit f85846bb ] Time synchronization was not properly enabled on non-MSI-X platforms. Fixes: 2c344ae2 ("igc: Add support for TX timestamping") Signed-off-by:
-
Vinicius Costa Gomes authored
[ Upstream commit 1e81dcc1 ] It was reported that when PCIe PTM is enabled, some lockups could be observed with some integrated i225-V models. While the issue is investigated, we can disable crosstimestamp for those models and see no loss of functionality, because those models don't have any support for time synchronization. Fixes: a90ec848 ("igc: Add support for PTP getcrosststamp()") Link: https://lore.kernel.org/all/924175a188159f4e03bd69908a91e606b574139b.camel@gmx.de/ Reported-by:
-
Dust Li authored
[ Upstream commit 349d4312 ] A crash occurs when smc_cdc_tx_handler() tries to access smc_sock but smc_release() has already freed it. [ 4570.695099] BUG: unable to handle page fault for address: 000000002eae9e88 [ 4570.696048] #PF: supervisor write access in kernel mode [ 4570.696728] #PF: error_code(0x0002) - not-present page [ 4570.697401] PGD 0 P4D 0 [ 4570.697716] Oops: 0002 [#1] PREEMPT SMP NOPTI [ 4570.698228] CPU: 0 PID: 0 Comm: swapper/0 Not tainted 5.16.0-rc4+ #111 [ 4570.699013] Hardware name: Alibaba Cloud Alibaba Cloud ECS, BIOS 8c24b4c 04/0 [ 4570.699933] RIP: 0010:_raw_spin_lock+0x1a/0x30 <...> [ 4570.711446] Call Trace: [ 4570.711746] <IRQ> [ 4570.711992] smc_cdc_tx_handler+0x41/0xc0 [ 4570.712470] smc_wr_tx_tasklet_fn+0x213/0x560 [ 4570.712981] ? smc_cdc_tx_dismisser+0x10/0x10 [ 4570.713489] tasklet_action_common.isra.17+0x66/0x140 [ 4570.714083] __do_softirq+0x123/0x2f4 [ 4570.714521] irq_exit_rcu+0xc4/0xf0 [ 4570.714934] common_interrupt+0xba/0xe0 Though smc_cdc_tx_handler() checked the existence of smc connection, smc_release() may have already dismissed and released the smc socket before smc_cdc_tx_handler() further visits it. smc_cdc_tx_handler() |smc_release() if (!conn) | | |smc_cdc_tx_dismiss_slots() | smc_cdc_tx_dismisser() | |sock_put(&smc->sk) <- last sock_put, | smc_sock freed bh_lock_sock(&smc->sk) (panic) | To make sure we won't receive any CDC messages after we free the smc_sock, add a refcount on the smc_connection for inflight CDC message(posted to the QP but haven't received related CQE), and don't release the smc_connection until all the inflight CDC messages haven been done, for both success or failed ones. Using refcount on CDC messages brings another problem: when the link is going to be destroyed, smcr_link_clear() will reset the QP, which then remove all the pending CQEs related to the QP in the CQ. To make sure all the CQEs will always come back so the refcount on the smc_connection can always reach 0, smc_ib_modify_qp_reset() was replaced by smc_ib_modify_qp_error(). And remove the timeout in smc_wr_tx_wait_no_pending_sends() since we need to wait for all pending WQEs done, or we may encounter use-after- free when handling CQEs. For IB device removal routine, we need to wait for all the QPs on that device been destroyed before we can destroy CQs on the device, or the refcount on smc_connection won't reach 0 and smc_sock cannot be released. Fixes: 5f08318f ("smc: connection data control (CDC)") Reported-by:
-
Dust Li authored
[ Upstream commit 90cee52f ] We found smc_llc_send_link_delete_all() sometimes wait for 2s timeout when testing with RDMA link up/down. It is possible when a smc_link is in ACTIVATING state, the underlaying QP is still in RESET or RTR state, which cannot send any messages out. smc_llc_send_link_delete_all() use smc_link_usable() to checks whether the link is usable, if the QP is still in RESET or RTR state, but the smc_link is in ACTIVATING, this LLC message will always fail without any CQE entering the CQ, and we will always wait 2s before timeout. Since we cannot send any messages through the QP before the QP enter RTS. I add a wrapper smc_link_sendable() which checks the state of QP along with the link state. And replace smc_link_usable() with smc_link_sendable() in all LLC & CDC message sending routine. Fixes: 5f08318f ("smc: connection data control (CDC)") Signed-off-by:
-
Wei Yongjun authored
[ Upstream commit 1b9dadba ] 'phy->pending_skb' is alloced when device probe, but forgot to free in the error handling path and remove path, this cause memory leak as follows: unreferenced object 0xffff88800bc06800 (size 512): comm "8", pid 11775, jiffies 4295159829 (age 9.032s) hex dump (first 32 bytes): 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................ 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................ backtrace: [<00000000d66c09ce>] __kmalloc_node_track_caller+0x1ed/0x450 [<00000000c93382b3>] kmalloc_reserve+0x37/0xd0 [<000000005fea522c>] __alloc_skb+0x124/0x380 [<0000000019f29f9a>] st21nfca_hci_i2c_probe+0x170/0x8f2 Fix it by freeing 'pending_skb' in error and remove. Fixes: 68957303 ("NFC: ST21NFCA: Add driver for STMicroelectronics ST21NFCA NFC Chip") Reported-by:
-
Aleksander Jan Bajkowski authored
[ Upstream commit 5be60a94 ] Received frames have FCS truncated. There is no need to subtract FCS length from the statistics. Fixes: fe1a5642 ("net: lantiq: Add Lantiq / Intel VRX200 Ethernet driver") Signed-off-by:
-
Christophe JAILLET authored
[ Upstream commit 1cd5384c ] 'ndev' is a managed resource allocated with devm_alloc_etherdev(), so there is no need to call free_netdev() explicitly or there will be a double free(). Simplify all error handling paths accordingly. Fixes: d51b6ce4 ("net: ethernet: add ag71xx driver") Signed-off-by:
-
Matthias-Christian Ott authored
[ Upstream commit ca506fca ] The D-Link DSB-650TX (2001:4002) is unable to receive Ethernet frames that are longer than 1518 octets, for example, Ethernet frames that contain 802.1Q VLAN tags. The frames are sent to the pegasus driver via USB but the driver discards them because they have the Long_pkt field set to 1 in the received status report. The function read_bulk_callback of the pegasus driver treats such received "packets" (in the terminology of the hardware) as errors but the field simply does just indicate that the Ethernet frame (MAC destination to FCS) is longer than 1518 octets. It seems that in the 1990s there was a distinction between "giant" (> 1518) and "runt" (< 64) frames and the hardware includes flags to indicate this distinction. It seems that the purpose of the distinction "giant" frames was to not allow infinitely long frames due to transmission errors and to allow hardware to have an upper limit of the frame size. However, the hardware already has such limit with its 2048 octet receive buffer and, therefore, Long_pkt is merely a convention and should not be treated as a receive error. Actually, the hardware is even able to receive Ethernet frames with 2048 octets which exceeds the claimed limit frame size limit of the driver of 1536 octets (PEGASUS_MTU). Fixes: 1da177e4 ("Linux-2.6.12-rc2") Signed-off-by:
-
Karsten Graul authored
[ Upstream commit 6d7373da ] In smc_wr_tx_send_wait() the completion on index specified by pend->idx is initialized and after smc_wr_tx_send() was called the wait for completion starts. pend->idx is used to get the correct index for the wait, but the pend structure could already be cleared in smc_wr_tx_process_cqe(). Introduce pnd_idx to hold and use a local copy of the correct index. Fixes: 09c61d24 ("net/smc: wait for departure of an IB message") Signed-off-by:
-
Xin Long authored
[ Upstream commit 5ec7d18d ] This patch is to delay the endpoint free by calling call_rcu() to fix another use-after-free issue in sctp_sock_dump(): BUG: KASAN: use-after-free in __lock_acquire+0x36d9/0x4c20 Call Trace: __lock_acquire+0x36d9/0x4c20 kernel/locking/lockdep.c:3218 lock_acquire+0x1ed/0x520 kernel/locking/lockdep.c:3844 __raw_spin_lock_bh include/linux/spinlock_api_smp.h:135 [inline] _raw_spin_lock_bh+0x31/0x40 kernel/locking/spinlock.c:168 spin_lock_bh include/linux/spinlock.h:334 [inline] __lock_sock+0x203/0x350 net/core/sock.c:2253 lock_sock_nested+0xfe/0x120 net/core/sock.c:2774 lock_sock include/net/sock.h:1492 [inline] sctp_sock_dump+0x122/0xb20 net/sctp/diag.c:324 sctp_for_each_transport+0x2b5/0x370 net/sctp/socket.c:5091 sctp_diag_dump+0x3ac/0x660 net/sctp/diag.c:527 __inet_diag_dump+0xa8/0x140 net/ipv4/inet_diag.c:1049 inet_diag_dump+0x9b/0x110 net/ipv4/inet_diag.c:1065 netlink_dump+0x606/0x1080 net/netlink/af_netlink.c:2244 __netlink_dump_start+0x59a/0x7c0 net/netlink/af_netlink.c:2352 netlink_dump_start include/linux/netlink.h:216 [inline] inet_diag_handler_cmd+0x2ce/0x3f0 net/ipv4/inet_diag.c:1170 __sock_diag_cmd net/core/sock_diag.c:232 [inline] sock_diag_rcv_msg+0x31d/0x410 net/core/sock_diag.c:263 netlink_rcv_skb+0x172/0x440 net/netlink/af_netlink.c:2477 sock_diag_rcv+0x2a/0x40 net/core/sock_diag.c:274 This issue occurs when asoc is peeled off and the old sk is freed after getting it by asoc->base.sk and before calling lock_sock(sk). To prevent the sk free, as a holder of the sk, ep should be alive when calling lock_sock(). This patch uses call_rcu() and moves sock_put and ep free into sctp_endpoint_destroy_rcu(), so that it's safe to try to hold the ep under rcu_read_lock in sctp_transport_traverse_process(). If sctp_endpoint_hold() returns true, it means this ep is still alive and we have held it and can continue to dump it; If it returns false, it means this ep is dead and can be freed after rcu_read_unlock, and we should skip it. In sctp_sock_dump(), after locking the sk, if this ep is different from tsp->asoc->ep, it means during this dumping, this asoc was peeled off before calling lock_sock(), and the sk should be skipped; If this ep is the same with tsp->asoc->ep, it means no peeloff happens on this asoc, and due to lock_sock, no peeloff will happen either until release_sock. Note that delaying endpoint free won't delay the port release, as the port release happens in sctp_endpoint_destroy() before calling call_rcu(). Also, freeing endpoint by call_rcu() makes it safe to access the sk by asoc->base.sk in sctp_assocs_seq_show() and sctp_rcv(). Thanks Jones to bring this issue up. v1->v2: - improve the changelog. - add kfree(ep) into sctp_endpoint_destroy_rcu(), as Jakub noticed. Reported-by:
-
Coco Li authored
[ Upstream commit 5471d522 ] The below referenced commit correctly updated the computation of number of segments (gso_size) by using only the gso payload size and removing the header lengths. With this change the regression test started failing. Update the tests to match this new behavior. Both IPv4 and IPv6 tests are updated, as a separate patch in this series will update udp_v6_send_skb to match this change in udp_send_skb. Fixes: 158390e4 ("udp: using datalen to cap max gso segments") Signed-off-by:
-
Coco Li authored
[ Upstream commit 736ef37f ] The max number of UDP gso segments is intended to cap to UDP_MAX_SEGMENTS, this is checked in udp_send_skb(). skb->len contains network and transport header len here, we should use only data len instead. This is the ipv6 counterpart to the below referenced commit, which missed the ipv6 change Fixes: 158390e4 ("udp: using datalen to cap max gso segments") Signed-off-by:
-
Chris Mi authored
[ Upstream commit 2820110d ] When there is ct or sample action, the ct or sample rule will be deleted and return. But if there is an extra mirror action, the forward rule can't be deleted because of the return. Fix it by removing the return. Fixes: 69e2916e ("net/mlx5: CT: Add support for mirroring") Fixes: f94d6389 ("net/mlx5e: TC, Add support to offload sample action") Signed-off-by:
-
Roi Dayan authored
[ Upstream commit f3e02e47 ] Instead of having sparse ifdefs in source files use a single ifdef in the tc sample header file and use stubs. Signed-off-by:
-
Maxim Mikityanskiy authored
[ Upstream commit 19c4aba2 ] There are two ICOSQs per channel: one is needed for RX, and the other for async operations (XSK TX, kTLS offload). Currently, the recovery flow for both is the same, and async ICOSQ is mistakenly treated like the regular ICOSQ. This patch prevents running the regular ICOSQ recovery on async ICOSQ. The purpose of async ICOSQ is to handle XSK wakeup requests and post kTLS offload RX parameters, it has nothing to do with RQ and XSKRQ UMRs, so the regular recovery sequence is not applicable here. Fixes: be5323c8 ("net/mlx5e: Report and recover from CQE error on ICOSQ") Signed-off-by:
-
Maxim Mikityanskiy authored
[ Upstream commit 17958d7c ] Both regular RQ and XSKRQ use the same ICOSQ for UMRs. When doing recovery for the ICOSQ, don't forget to deactivate XSKRQ. XSK can be opened and closed while channels are active, so a new mutex prevents the ICOSQ recovery from running at the same time. The ICOSQ recovery deactivates and reactivates XSKRQ, so any parallel change in XSK state would break consistency. As the regular RQ is running, it's not enough to just flush the recovery work, because it can be rescheduled. Fixes: be5323c8 ("net/mlx5e: Report and recover from CQE error on ICOSQ") Signed-off-by:
-
Amir Tzin authored
[ Upstream commit 918fc385 ] Function mlx5e_tx_reporter_dump_sq() casts its void * argument to struct mlx5e_txqsq *, but in TX-timeout-recovery flow the argument is actually of type struct mlx5e_tx_timeout_ctx *. mlx5_core 0000:08:00.1 enp8s0f1: TX timeout detected mlx5_core 0000:08:00.1 enp8s0f1: TX timeout on queue: 1, SQ: 0x11ec, CQ: 0x146d, SQ Cons: 0x0 SQ Prod: 0x1, usecs since last trans: 21565000 BUG: stack guard page was hit at 0000000093f1a2de (stack is 00000000b66ea0dc..000000004d932dae) kernel stack overflow (page fault): 0000 [#1] SMP NOPTI CPU: 5 PID: 95 Comm: kworker/u20:1 Tainted: G W OE 5.13.0_mlnx #1 Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS rel-1.13.0-0-gf21b5a4aeb02-prebuilt.qemu.org 04/01/2014 Workqueue: mlx5e mlx5e_tx_timeout_work [mlx5_core] RIP: 0010:mlx5e_tx_reporter_dump_sq+0xd3/0x180 [mlx5_core] Call Trace: mlx5e_tx_reporter_dump+0x43/0x1c0 [mlx5_core] devlink_health_do_dump.part.91+0x71/0xd0 devlink_health_report+0x157/0x1b0 mlx5e_reporter_tx_timeout+0xb9/0xf0 [mlx5_core] ? mlx5e_tx_reporter_err_cqe_recover+0x1d0/0x1d0 [mlx5_core] ? mlx5e_health_queue_dump+0xd0/0xd0 [mlx5_core] ? update_load_avg+0x19b/0x550 ? set_next_entity+0x72/0x80 ? pick_next_task_fair+0x227/0x340 ? finish_task_switch+0xa2/0x280 mlx5e_tx_timeout_work+0x83/0xb0 [mlx5_core] process_one_work+0x1de/0x3a0 worker_thread+0x2d/0x3c0 ? process_one_work+0x3a0/0x3a0 kthread+0x115/0x130 ? kthread_park+0x90/0x90 ret_from_fork+0x1f/0x30 --[ end trace 51ccabea504edaff ]--- RIP: 0010:mlx5e_tx_reporter_dump_sq+0xd3/0x180 PKRU: 55555554 Kernel panic - not syncing: Fatal exception Kernel Offset: disabled end Kernel panic - not syncing: Fatal exception To fix this bug add a wrapper for mlx5e_tx_reporter_dump_sq() which extracts the sq from struct mlx5e_tx_timeout_ctx and set it as the TX-timeout-recovery flow dump callback. Fixes: 5f29458b ("net/mlx5e: Support dump callback in TX reporter") Signed-off-by:
-
Chris Mi authored
[ Upstream commit d671e109 ] Only prio 1 is supported if firmware doesn't support ignore flow level for nic mode. The offending commit removed the check wrongly. Add it back. Fixes: 9a99c8f1 ("net/mlx5e: E-Switch, Offload all chain 0 priorities when modify header and forward action is not supported") Signed-off-by:
-
Moshe Shemesh authored
[ Upstream commit 33de865f ] SF do not directly control the PCI device. During recovery flow SF should not be allowed to do pci disable or pci reset, its PF will do it. It fixes the following kernel trace: mlx5_core.sf mlx5_core.sf.25: mlx5_health_try_recover:387:(pid 40948): starting health recovery flow mlx5_core 0000:03:00.0: mlx5_pci_slot_reset was called mlx5_core 0000:03:00.0: wait vital counter value 0xab175 after 1 iterations mlx5_core.sf mlx5_core.sf.25: firmware version: 24.32.532 mlx5_core.sf mlx5_core.sf.23: mlx5_health_try_recover:387:(pid 40946): starting health recovery flow mlx5_core 0000:03:00.0: mlx5_pci_slot_reset was called mlx5_core 0000:03:00.0: wait vital counter value 0xab193 after 1 iterations mlx5_core.sf mlx5_core.sf.23: firmware version: 24.32.532 mlx5_core.sf mlx5_core.sf.25: mlx5_cmd_check:813:(pid 40948): ENABLE_HCA(0x104) op_mod(0x0) failed, status bad resource state(0x9), syndrome (0x658908) mlx5_core.sf mlx5_core.sf.25: mlx5_function_setup:1292:(pid 40948): enable hca failed mlx5_core.sf mlx5_core.sf.25: mlx5_health_try_recover:389:(pid 40948): health recovery failed Fixes: 1958fc2f ("net/mlx5: SF, Add auxiliary device driver") Signed-off-by:
-
Shay Drory authored
[ Upstream commit aa968f92 ] In case IRQ layer failed to find or to request irq, the driver is printing the first cpu of the provided affinity as part of the error print. Empty affinity is a valid input for the IRQ layer, and it is an error to call cpumask_first() on empty affinity. Remove the first cpu print from the error message. Fixes: c36326d3 ("net/mlx5: Round-Robin EQs over IRQs") Signed-off-by:
-
Miaoqian Lin authored
[ Upstream commit 6b8b4258 ] The mlx5_get_uars_page() function returns error pointers. Using IS_ERR() to check the return value to fix this. Fixes: 4ec9e7b0 ("net/mlx5: DR, Expose steering domain functionality") Signed-off-by:
-
Dan Carpenter authored
[ Upstream commit 9020be11 ] The "mybuf" string comes from the user, so we need to ensure that it is NUL terminated. Link: https://lore.kernel.org/r/20211214070527.GA27934@kili Fixes: bd2cdd5e ("scsi: lpfc: NVME Initiator: Add debugfs support") Reviewed-by:
-
Tom Rix authored
commit 732bc2ff upstream. Clang static analysis reports this warning hooks.c:5765:6: warning: 4th function call argument is an uninitialized value if (selinux_xfrm_postroute_last(sksec->sid, skb, &ad, proto)) ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ selinux_parse_skb() can return ok without setting proto. The later call to selinux_xfrm_postroute_last() does an early check of proto and can return ok if the garbage proto value matches. So initialize proto. Cc: stable@vger.kernel.org Fixes: eef9b416 ("selinux: cleanup selinux_xfrm_sock_rcv_skb() and selinux_xfrm_postroute_last()") Signed-off-by:
-
Javier Martinez Canillas authored
commit 4bc5e64e upstream. Commit 8633ef82 ("drivers/firmware: consolidate EFI framebuffer setup for all arches") made the Generic System Framebuffers (sysfb) driver able to be built on non-x86 architectures. But it left the efifb_setup_from_dmi() function prototype declaration in the architecture specific headers. This could lead to the following compiler warning as reported by the kernel test robot: drivers/firmware/efi/sysfb_efi.c:70:6: warning: no previous prototype for function 'efifb_setup_from_dmi' [-Wmissing-prototypes] void efifb_setup_from_dmi(struct screen_info *si, const char *opt) ^ drivers/firmware/efi/sysfb_efi.c:70:1: note: declare 'static' if the function is not intended to be used outside of this translation unit void efifb_setup_from_dmi(struct screen_info *si, const char *opt) Fixes: 8633ef82 ("drivers/firmware: consolidate EFI framebuffer setup for all arches") Reported-by:
-
Michael Ellerman authored
commit 8d84fca4 upstream. In note_prot_wx() we bail out without reporting anything if CONFIG_PPC_DEBUG_WX is disabled. But CONFIG_PPC_DEBUG_WX was removed in the conversion to generic ptdump, we now need to use CONFIG_DEBUG_WX instead. Fixes: e0847283 ("powerpc/ptdump: Convert powerpc to GENERIC_PTDUMP") Cc: stable@vger.kernel.org # v5.15+ Signed-off-by:
-
Heiko Carstens authored
commit 4eb1782e upstream. Commit 85bf17b2 ("recordmcount.pl: look for jgnop instruction as well as bcrl on s390") added a new alternative mnemonic for the existing brcl instruction. This is required for the combination old gcc version (pre 9.0) and binutils since version 2.37. However at the same time this commit introduced a typo, replacing brcl with bcrl. As a result no mcount locations are detected anymore with old gcc versions (pre 9.0) and binutils before version 2.37. Fix this by using the correct mnemonic again. Reported-by:
-
Libin Yang authored
[ Upstream commit 78ea40ef ] In the HDAS ACPI scope, the SoundWire may not be the direct child of HDAS. It needs to go through the ACPI table at max depth of 2 to find the SoundWire device from HDAS. Reviewed-by:
-
Libin Yang authored
[ Upstream commit 385f287f ] The existing code currently sets a pointer to an ACPI handle before checking that it's actually a SoundWire controller. This can lead to issues where the graph walk continues and eventually fails, but the pointer was set already. This patch changes the logic so that the information provided to the caller is set when a controller is found. Reviewed-by:
-
Jackie Liu authored
[ Upstream commit d7f55471 ] Fix modpost Section mismatch error in memblock_phys_alloc() [...] WARNING: modpost: vmlinux.o(.text.unlikely+0x1dcc): Section mismatch in reference from the function memblock_phys_alloc() to the function .init.text:memblock_phys_alloc_range() The function memblock_phys_alloc() references the function __init memblock_phys_alloc_range(). This is often because memblock_phys_alloc lacks a __init annotation or the annotation of memblock_phys_alloc_range is wrong. ERROR: modpost: Section mismatches detected. Set CONFIG_SECTION_MISMATCH_WARN_ONLY=y to allow them. [...] memblock_phys_alloc() is a one-line wrapper, make it __always_inline to avoid these section mismatches. Reported-by:
-
Wang Qing authored
[ Upstream commit eb66fb03 ] This should be (res->end - res->start + 1) here actually, use resource_size() derectly. Signed-off-by:
-
Miaoqian Lin authored
[ Upstream commit 804034c4 ] The devm_ioremap() function returns NULL on error, it doesn't return error pointers. Also according to doc of device_property_read_u64_array, values in info array are properties of device or NULL. Signed-off-by:
-
Helge Deller authored
[ Upstream commit 484730e5 ] When a trap 7 (Instruction access rights) occurs, this means the CPU couldn't execute an instruction due to missing execute permissions on the memory region. In this case it seems the CPU didn't even fetched the instruction from memory and thus did not store it in the cr19 (IIR) register before calling the trap handler. So, the trap handler will find some random old stale value in cr19. This patch simply overwrites the stale IIR value with a constant magic "bad food" value (0xbaadf00d), in the hope people don't start to try to understand the various random IIR values in trap 7 dumps. Noticed-by:
-