Select Git revision
Search by author
- Any Author
- authors
-
Angus Ainslie
angus.ainslie
-
Eric Kuzmenko
eric.kuzmenko
-
Evangelos Ribeiro Tzaras
evangelos.tzaras
-
Francois Techene
francois.techene
-
Guido Gunther
guido.gunther
-
JC Staudt
jcstaudt
-
Jonathon Hall
jonathon.hall
-
Julian Sparber
julian.sparber
-
Martin Kepplinger
martin.kepplinger
-
Mohammed Sadiq
mohammed.sadiq
-
Richard Kolla
richard.kolla
-
Sam Hewitt sam.hewitt
-
Sebastian Krzyszkowiak
sebastian.krzyszkowiak
- May 05, 2015
-
-
Wang Nan authored
Since parse_perf_probe_point() deals with a user passed argument, we should not assume it to be a valid string. Without this patch, if pass '' to perf probe, a segfault raises: $ perf probe -a '' Segmentation fault This patch checks argument of parse_perf_probe_point() before string processing. After this patch: $ perf probe -a '' usage: perf probe [<options>] 'PROBEDEF' ['PROBEDEF' ...] or: perf probe [<options>] --add 'PROBEDEF' [--add 'PROBEDEF' ...] ... Signed-off-by:
-
- May 01, 2015
-
-
Namhyung Kim authored
The commit 512ae1bd ("perf tools: Consolidate management of default sort orders") changed default value of the 'sort_order' variable to NULL indicating that users don't set any sort keys on the command line. However it missed to update a check in perf_evlist__tty_browse_hists() so that 'perf report -T' cannot show the per-thread values after the normal output. This patch fixes it to work again. Note that the -T option only works on --stdio and neither --sort nor --parent option was given. Signed-off-by:
-
Michael Ellerman authored
My patch to add install support for the powerpc selftests had a typo, leading to the three tests in the pmu directory itself not being installed. Fixes: 6faeeea4 ("selftests: Add install support for the powerpc tests") Signed-off-by:
-
- Apr 30, 2015
-
-
Michael Ellerman authored
This reverts commit feba4036. Although the principle of this change is good, the implementation has a few issues. Firstly we can sometimes fail to abort a syscall because r12 may have been clobbered by C code if we went down the virtual CPU accounting path, or if syscall tracing was enabled. Secondly we have decided that it is safer to abort the syscall even earlier in the syscall entry path, so that we avoid the syscall tracing path when we are transactional. So that we have time to thoroughly test those changes we have decided to revert this for this merge window and will merge the fixed version in the next window. NB. Rather than reverting the selftest we just drop tm-syscall from TEST_PROGS so that it's not run by default. Fixes: feba4036 ("powerpc/tm: Abort syscalls in active transactions") Signed-off-by:
-
- Apr 27, 2015
-
-
Petr Holasek authored
This patch fixes the race in the beginning of benchmark run when some threads hasn't got assigned curr_cpu yet so they don't occur in nodes-of-process stats and benchmark concludes that all remaining threads are converged already. The race can be reproduced with small amount of threads and some bigger amount of shared process memory, e.g. one process, two threads and 5GB of process memory. Signed-off-by:
-
Petr Holasek authored
Corrected description and fixed function of --quiet argument. Signed-off-by:
-
Davidlohr Bueso authored
The futex-requeue benchmark can hang because of missing wakeups once the benchmark is done, ie: [Run 1]: Requeued 1024 of 1024 threads in 0.3290 ms perf: couldn't wakeup all tasks (135/1024) This bug, while perhaps suggesting missing wakeups in kernel futex code, is merely a consequence of the crappy FUTEX_CMP_REQUEUE man page, incorrectly mentioning that the number of requeued tasks is in fact returned, not the wakeups. This patch acknowledges this and updates the corresponding futex_wake code around it. Signed-off-by:
-
He Kuang authored
There are missing curly braces which causes find_variable() return wrong value when probing with global variables. This problem can be reproduced as following: $ perf probe -v --add='generic_perform_write global_variable_for_test' ... Try to find probe point from debuginfo. Probe point found: generic_perform_write+0 Searching 'global_variable_for_test' variable in context. An error occurred in debuginfo analysis (-2). Error: Failed to add events. Reason: No such file or directory (Code: -2) After this patch: $ perf probe -v --add='generic_perform_write global_variable_for_test' ... Converting variable global_variable_for_test into trace event. global_variable_for_test type is int. Found 1 probe_trace_events. Opening /sys/kernel/debug/tracing/kprobe_events write=1 Added new event: Writing event: p:probe/generic_perform_write _stext+1237464 global_variable_for_test=@global_variable_for_test+0:s32 probe:generic_perform_write (on generic_perform_write with global_variable_for_test) You can now use it in all perf tools, such as: perf record -e probe:generic_perform_write -aR sleep 1 Signed-off-by: -
Wang Nan authored
Perf top raise a warning if a kernel sample is collected but kernel map is restricted. The warning message needs to dereference al.map->dso... However, previous perf_event__preprocess_sample() doesn't always guarantee al.map != NULL, for example, when kernel map is restricted. This patch validates al.map before dereferencing, avoid the segfault. Before this patch: $ cat /proc/sys/kernel/kptr_restrict 1 $ perf top -p 120183 perf: Segmentation fault -------- backtrace -------- /path/to/perf[0x509868] /lib64/libc.so.6(+0x3545f)[0x7f9a1540045f] /path/to/perf[0x448820] /path/to/perf(cmd_top+0xe3c)[0x44a5dc] /path/to/perf[0x4766a2] /path/to/perf(main+0x5f5)[0x42e545] /lib64/libc.so.6(__libc_start_main+0xf4)[0x7f9a153ecbd4] /path/to/perf[0x42e674] And gdb call trace: Program received signal SIGSEGV, Segmentation fault. perf_event__process_sample (machine=0xa44030, sample=0x7fffffffa4c0, evsel=0xa43b00, event=0x7ffff41c3000, tool=0x7fffffffa8a0) at builtin-top.c:736 736 !RB_EMPTY_ROOT(&al.map->dso->symbols[MAP__FUNCTION]) ? (gdb) bt #0 perf_event__process_sample (machine=0xa44030, sample=0x7fffffffa4c0, evsel=0xa43b00, event=0x7ffff41c3000, tool=0x7fffffffa8a0) at builtin-top.c:736 #1 perf_top__mmap_read_idx (top=top@entry=0x7fffffffa8a0, idx=idx@entry=0) at builtin-top.c:855 #2 0x000000000044a5dd in perf_top__mmap_read (top=0x7fffffffa8a0) at builtin-top.c:872 #3 __cmd_top (top=0x7fffffffa8a0) at builtin-top.c:997 #4 cmd_top (argc=<optimized out>, argv=<optimized out>, prefix=<optimized out>) at builtin-top.c:1267 #5 0x00000000004766a3 in run_builtin (p=p@entry=0x8a6ce8 <commands+264>, argc=argc@entry=3, argv=argv@entry=0x7fffffffdf70) at perf.c:371 #6 0x000000000042e546 in handle_internal_command (argv=0x7fffffffdf70, argc=3) at perf.c:430 #7 run_argv (argv=0x7fffffffdcf0, argcp=0x7fffffffdcfc) at perf.c:474 #8 main (argc=3, argv=0x7fffffffdf70) at perf.c:589 (gdb) Signed-off-by:
-
- Apr 24, 2015
-
-
Namhyung Kim authored
In my i386 build, it failed like this: CC event-parse.o event-parse.c: In function 'print_str_arg': event-parse.c:3868:5: warning: format '%lu' expects argument of type 'long unsigned int', but argument 3 has type 'uint64_t' [-Wformat] Signed-off-by: -
David Ahern authored
0d68bc92 breaks compiles on RHEL6/OL6: cc1: warnings being treated as errors builtin-kmem.c: In function ‘search_page_alloc_stat’: builtin-kmem.c:322: error: declaration of ‘stat’ shadows a global declaration node = &parent->rb_left; /usr/include/sys/stat.h:455: error: shadowed declaration is here builtin-kmem.c: In function ‘perf_evsel__process_page_alloc_event’: builtin-kmem.c:378: error: declaration of ‘stat’ shadows a global declaration /usr/include/sys/stat.h:455: error: shadowed declaration is here builtin-kmem.c: In function ‘perf_evsel__process_page_free_event’: builtin-kmem.c:431: error: declaration of ‘stat’ shadows a global declaration /usr/include/sys/stat.h:455: error: shadowed declaration is here Rename local variable to pstat to avoid the name conflict. Signed-off-by:
-
- Apr 23, 2015
-
-
Bobby Powers authored
Some toolchains (like Hardened Gentoo) define _FORTIFY_SOURCE in the built-in, default args. This causes perf builds to fail with: <command-line>:0:0: error: "_FORTIFY_SOURCE" redefined [-Werror] <built-in>: note: this is the location of the previous definition cc1: all warnings being treated as errors To avoid this, undefine _FORTIFY_SOURCE before (possibly re-)defining it in tools/lib/api. v2 applies cleanly on top of already pulled kbuild changes for 4.1-rc1. Signed-off-by:
-
Will Deacon authored
Building the perf tool for 32-bit ARM results in the following build error due to a combination of an incorrect conversion specifier and compiling with -Werror: builtin-kmem.c: In function ‘print_page_summary’: builtin-kmem.c:644:9: error: format ‘%lu’ expects argument of type ‘long unsigned int’, but argument 3 has type ‘u64’ [-Werror=format=] nr_alloc_freed, (total_alloc_freed_bytes) / 1024); ^ builtin-kmem.c:647:9: error: format ‘%lu’ expects argument of type ‘long unsigned int’, but argument 3 has type ‘u64’ [-Werror=format=] (total_page_alloc_bytes - total_alloc_freed_bytes) / 1024); ^ cc1: all warnings being treated as errors This patch fixes the problem by consistently using PRIu64 for printing out u64 values. Signed-off-by: -
Arnaldo Carvalho de Melo authored
We were not checking in the inner event processing loop if the forked workload had finished, which, on a busy system, may make it take a long time trying to drain events, entering a seemingly neverending loop, waiting for the system to get idle enough to make it drain the buffers. Fix it by disabling the events when 'done' is true, in the inner loop, to start draining what is in the buffers. Now: [root@ssdandy ~]# time trace --filter-pids 14003 -a sleep 1 | tail 996.748 ( 0.002 ms): sh/30296 rt_sigprocmask(how: SETMASK, nset: 0x7ffc83418160, sigsetsize: 8) = 0 996.751 ( 0.002 ms): sh/30296 rt_sigprocmask(how: BLOCK, nset: 0x7ffc834181f0, oset: 0x7ffc83418270, sigsetsize: 8) = 0 996.755 ( 0.002 ms): sh/30296 rt_sigaction(sig: INT, act: 0x7ffc83417f50, oact: 0x7ffc83417ff0, sigsetsize: 8) = 0 1004.543 ( 0.362 ms): tail/30198 ... [continued]: read()) = 4096 1004.548 ( 7.791 ms): sh/30296 wait4(upid: -1, stat_addr: 0x7ffc834181a0) ... 1004.975 ( 0.427 ms): tail/30198 read(buf: 0x7633f0, count: 8192) = 4096 1005.390 ( 0.410 ms): tail/30198 read(buf: 0x765410, count: 8192) = 4096 1005.743 ( 0.348 ms): tail/30198 read(buf: 0x7633f0, count: 8192) = 4096 1006.197 ( 0.449 ms): tail/30198 read(buf: 0x765410, count: 8192) = 4096 1006.492 ( 0.290 ms): tail/30198 read(buf: 0x7633f0, count: 8192) = 4096 real 0m1.219s user 0m0.704s sys 0m0.331s [root@ssdandy ~]# Reported-by:
-
Arnaldo Carvalho de Melo authored
commit f7aa222f Author: Arnaldo Carvalho de Melo <acme@redhat.com> Date: Tue Feb 3 13:25:39 2015 -0300 perf trace: No need to enable evsels for workload started from perf The assumption was that whenever a workload is specified, the attr.enable_on_exec evsel flag would be set, but that is not happening when perf_record_opts.system_wide is set, for instance That resulted in both perf_evlist__enable() and attr.enable_on_exec being not called/set, which made the events to remain disabled while the workload runs, producing no output. Fix it, by calling perf_evlist__enable() in the 'trace' tool when forking and not targetting a workload started from trace v2: Test against !target__none(), as suggested by Namhyung Kim, that is what is used in perf_evsel__config() when deciding if the attr.enable_on_exec flag to be set. More work is needed to cover other cases such as opts->initial_delay. Acked-by:
-
- Apr 18, 2015
-
-
Len Brown authored
HSW expanded MSR_PKG_CST_CONFIG_CONTROL.Package-C-State-Limit, from bits[2:0] used by previous implementations, to [3:0]. The value 1000b is unlimited, and is used by BDW and SKL too. Signed-off-by: -
Len Brown authored
turbostat --debug ... CPUID(0x15): eax_crystal: 2 ebx_tsc: 100 ecx_crystal_hz: 0 TSC: 1200 MHz (24000000 Hz * 100 / 2 / 1000000) Signed-off-by: -
Andrey Semin authored
While not yet documented in the Software Developer's Manual, the data-sheet for modern Xeon states that DRAM RAPL ENERGY units are fixed at 15.3 uJ, rather than being discovered via MSR. Before this patch, DRAM energy on these products is over-stated by turbostat because the RAPL units are 4x larger. ref: "Xeon E5-2600 v3/E5-1600 v3 Datasheet Volume 2" http://www.intel.com/content/dam/www/public/us/en/documents/datasheets/xeon-e5-v3-datasheet-vol-2.pdf Signed-off-by:
-
Len Brown authored
Skylake adds some additional residency counters. Skylake supports a different mix of RAPL registers from any previous product. In most other ways, Skylake is like Broadwell. Signed-off-by: -
Thomas D authored
Since commit ee0778a3 ("tools/power: turbostat: make Makefile a bit more capable") turbostat's Makefile is using [...] BUILD_OUTPUT := $(PWD) [...] which obviously causes trouble when building "turbostat" with make -C /usr/src/linux/tools/power/x86/turbostat ARCH=x86 turbostat because GNU make does not update nor guarantee that $PWD is set. This patch changes the Makefile to use $CURDIR instead, which GNU make guarantees to set and update (i.e. when using "make -C ...") and also adds support for the O= option (see "make help" in your root of your kernel source tree for more details). Link: https://bugs.gentoo.org/show_bug.cgi?id=533918 Fixes: ee0778a3 ("tools/power: turbostat: make Makefile a bit more capable") Signed-off-by:
-
Len Brown authored
Some distros (Ubuntu) ship the msr driver as a module. If turbosat is run as root on those systems, and discovers that there is no /dev/cpu/cpu0/msr, it will now "modprobe msr" for the user. If not root, the modprobe attempt will fail, and turbostat will exit as before: turbostat: no /dev/cpu/0/msr, Try "# modprobe msr" : No such file or directory Signed-off-by: -
Len Brown authored
and up to 18 cores of turbo ratio limit when using the turbostat --debug option. Signed-off-by: -
Len Brown authored
s/MSR_NHM_TURBO_RATIO_LIMIT/MSR_TURBO_RATIO_LIMIT/ s/MSR_IVT_TURBO_RATIO_LIMIT/MSR_TURBO_RATIO_LIMIT1/ syntax only -- use the documented strings describing these registers. Signed-off-by:
-
- Apr 16, 2015
-
-
Andy Lutomirski authored
This is a very simple test that makes system calls with TF set. This test currently fails when running the 32-bit build on a 64-bit kernel on an Intel CPU. This bug will be fixed by the next commit. Signed-off-by:
-
- Apr 15, 2015
-
-
David Rientjes authored
When MAP_HUGETLB memory is unmapped, the length must be hugepage aligned, otherwise it fails with -EINVAL. All tests currently behave correctly, but it's better to explcitly test the return value for completeness and document the requirement, especially if users copy map_hugetlb.c as a sample implementation. Signed-off-by:
-
Lucas Stach authored
libpci 3.3.0 introduced an additional member in the pci_filter struct which needs to be initialized to -1 to get the same behavior as before the API change. The libpci internal helpers got updated accordingly, but as the cpupower pci helpers initialized the struct themselves the behavior changed. Use the libpci helper pci_filter_init() to fix this and guard against similar breakages in the future. This fixes probing of the AMD fam12h/14h cpuidle monitor on systems with libpci >= 3.3.0. Signed-off-by:
-
- Apr 14, 2015
-
-
Bob Moore authored
ACPICA commit 84f3569db7accc576ace2dae81d101467254fe9d Was using %d instead of properly using %u. This patch only affects acpidump tool. Link: https://github.com/acpica/acpica/commit/84f3569d Signed-off-by:
-
Lv Zheng authored
ACPICA commit 9e2d8180f4d5e61949b17513bae8aff6412f62dd The offset calculation needn't convert a pointer to a special integer type. So this patch uses ACPI_TO_INTEGER() instead. This patch only affects acpidump tool. Link: https://github.com/acpica/acpica/commit/9e2d8180 Signed-off-by:
-
- Apr 13, 2015
-
-
He Kuang authored
The first argument passed to find_probe_point_lazy() should be CU die, which will be passed to die_walk_lines() when lazy_line matches. Currently, when we probe with lazy_line pattern to file without function name, NULL pointer is passed and causes a segment fault. Can be reproduced as following: $ perf probe -k vmlinux --add='fs/super.c;s->s_count=1;' [ 1958.984658] perf[1020]: segfault at 10 ip 00007fc6e10d8c71 sp 00007ffcbfaaf900 error 4 in libdw-0.161.so[7fc6e10ce000+34000] Segmentation fault After this patch: $ perf probe -k vmlinux --add='fs/super.c;s->s_count=1;' Added new event: probe:_stext (on @fs/super.c) You can now use it in all perf tools, such as: perf record -e probe:_stext -aR sleep 1 Signed-off-by: -
Naohiro Aota authored
If we use lazy matching, it failed to open a souce file if perf command is invoked outside of compilation directory: $ perf probe -a '__schedule;clear_*' Failed to open kernel/sched/core.c: No such file or directory Error: Failed to add events. (-2) OTOH, other commands like "probe -L" can solve the souce directory by themselves. Let's make it possible for lazy matching too! Signed-off-by:
-
He Kuang authored
When perf probe searched in a debuginfo file and failed, it tried with an alternative, in function get_alternative_probe_event(): memcpy(tmp, &pev->point, sizeof(*tmp)); memset(&pev->point, 0, sizeof(pev->point)); In this case, it drops the retprobe flag and forgets to set it back in find_alternative_probe_point(), so the problem occurs. Can be reproduced as following: $ perf probe -v -k vmlinux --add='sys_write%return' ... Added new event: Writing event: p:probe/sys_write _stext+1584952 probe:sys_write (on sys_write%return) $ cat /sys/kernel/debug/tracing/kprobe_events p:probe/sys_write _stext+1584952 After this patch: $ perf probe -v -k vmlinux --add='sys_write%return' Added new event: Writing event: r:probe/sys_write SyS_write+0 probe:sys_write (on sys_write%return) $ cat /sys/kernel/debug/tracing/kprobe_events r:probe/sys_write SyS_write Signed-off-by: -
Len Brown authored
syntax only. The cool kids are now using the phrase "base frequency", where in the past we used "max non-turbo frequency" or "TSC frequency". This distinction becomes important when a processor has a TSC that runs at a different speed than the "base frequency". Signed-off-by: -
Len Brown authored
cosmetic only. order the decoding of MSR_PERF_LIMIT_REASONS bits from MSB to LSB -- which you notice when more than 1 bit is set and you are, say, comparing the output to the documentation... Signed-off-by: -
Len Brown authored
Casual turbostat users generally just want to know MHz. So by default, just print enough information to make sense of MHz. All the other configuration data and columns for C-states and temperature etc, are printed with the --debug option. Signed-off-by: -
Namhyung Kim authored
The perf kmem command records and analyze kernel memory allocation only for SLAB objects. This patch implement a simple page allocator analyzer using kmem:mm_page_alloc and kmem:mm_page_free events. It adds two new options of --slab and --page. The --slab option is for analyzing SLAB allocator and that's what perf kmem currently does. The new --page option enables page allocator events and analyze kernel memory usage in page unit. Currently, 'stat --alloc' subcommand is implemented only. If none of these --slab nor --page is specified, --slab is implied. First run 'perf kmem record' to generate a suitable perf.data file: # perf kmem record --page sleep 5 Then run 'perf kmem stat' to postprocess the perf.data file: # perf kmem stat --page --alloc --line 10 ------------------------------------------------------------------------------- PFN | Total alloc (KB) | Hits | Order | Mig.type | GFP flags ------------------------------------------------------------------------------- 4045014 | 16 | 1 | 2 | RECLAIM | 00285250 4143980 | 16 | 1 | 2 | RECLAIM | 00285250 3938658 | 16 | 1 | 2 | RECLAIM | 00285250 4045400 | 16 | 1 | 2 | RECLAIM | 00285250 3568708 | 16 | 1 | 2 | RECLAIM | 00285250 3729824 | 16 | 1 | 2 | RECLAIM | 00285250 3657210 | 16 | 1 | 2 | RECLAIM | 00285250 4120750 | 16 | 1 | 2 | RECLAIM | 00285250 3678850 | 16 | 1 | 2 | RECLAIM | 00285250 3693874 | 16 | 1 | 2 | RECLAIM | 00285250 ... | ... | ... | ... | ... | ... ------------------------------------------------------------------------------- SUMMARY (page allocator) ======================== Total allocation requests : 44,260 [ 177,256 KB ] Total free requests : 117 [ 468 KB ] Total alloc+freed requests : 49 [ 196 KB ] Total alloc-only requests : 44,211 [ 177,060 KB ] Total free-only requests : 68 [ 272 KB ] Total allocation failures : 0 [ 0 KB ] Order Unmovable Reclaimable Movable Reserved CMA/Isolated ----- ------------ ------------ ------------ ------------ ------------ 0 32 . 44,210 . . 1 . . . . . 2 . 18 . . . 3 . . . . . 4 . . . . . 5 . . . . . 6 . . . . . 7 . . . . . 8 . . . . . 9 . . . . . 10 . . . . . Signed-off-by:
-
- Apr 11, 2015
-
-
Sam bobroff authored
Check that a syscall made during an active transaction will fail with the correct failure code and that one made during a suspended transaction will succeed. Signed-off-by:
-
Sam bobroff authored
Move get_auxv_entry() from pmu/lib.c up to harness.c in order to make it available to other tests. Signed-off-by:
-
- Apr 10, 2015
-
-
David Ahern authored
The data_head and data_tail fields are defined as __u64 in linux/perf_event.h, but perf userspace uses int and unsigned int. Convert all references to u64 for consistency. Signed-off-by:
-
Masami Hiramatsu authored
To avoid probing in unintended binary, the orphaned -x option must be checked and warned. Without this patch, following command sets up the probe in the kernel. ----- # perf probe -a strcpy -x ./perf Added new event: probe:strcpy (on strcpy) You can now use it in all perf tools, such as: perf record -e probe:strcpy -aR sleep 1 ----- But in this case, it seems that the user may want to probe in the perf binary. With this patch, perf-probe correctly handles the orphaned -x. ----- # perf probe -a strcpy -x ./perf Error: -x/-m must follow the probe definitions. ... ----- Reported-by: -
Masami Hiramatsu authored
Support multiple probes on different binaries with just one command. In the result, this example sets up the probes on icmp_rcv in kernel, on main and set_target in perf, and on pcspkr_event in pcspker.ko driver. ----- # perf probe -a icmp_rcv -x ./perf -a main -a set_target \ -m /lib/modules/4.0.0-rc5+/kernel/drivers/input/misc/pcspkr.ko \ -a pcspkr_event Added new event: probe:icmp_rcv (on icmp_rcv) You can now use it in all perf tools, such as: perf record -e probe:icmp_rcv -aR sleep 1 Added new event: probe_perf:main (on main in /home/mhiramat/ksrc/linux-3/tools/perf/perf) You can now use it in all perf tools, such as: perf record -e probe_perf:main -aR sleep 1 Added new event: probe_perf:set_target (on set_target in /home/mhiramat/ksrc/linux-3/tools/perf/perf) You can now use it in all perf tools, such as: perf record -e probe_perf:set_target -aR sleep 1 Added new event: probe:pcspkr_event (on pcspkr_event in pcspkr) You can now use it in all perf tools, such as: perf record -e probe:pcspkr_event -aR sleep 1 ----- Reported-by:
-