... | ... | @@ -298,29 +298,14 @@ All the chips in this page are detailed below, except this one: |
|
|
* ANT1:<br>4-pin 4G antenna end, 1.5x0.6 mm
|
|
|
* F1 (added in Evergreen):<br>Littelfuse [400CC1206LR-C](https://www.mouser.com/ProductDetail/Littelfuse/400CC1206LR-C?qs=ahcBuItHZ3xZHvq61gjfjQ%3D%3D) PPTC resettable fuse, [datasheet](https://www.mouser.com/datasheet/2/240/Littelfuse_02282019_PTC_LoRho_Datasheet_v1.11.-1536908.pdf) <br>
|
|
|
|
|
|
## Other chips not in the schematics
|
|
|
|
|
|
* Thales Cinterion [PLS8-E](https://www.thalesgroup.com/en/markets/digital-identity-and-security/iot/iot-connectivity/products/iot-products/pls8-e-high-speed) / [PLS8-US](https://www.thalesgroup.com/en/markets/digital-identity-and-security/iot/iot-connectivity/products/iot-products/pls8-us-high-speed) or BroadMobi [BM818-E1](http://www.broadmobi.com/en/module_show.php?id=18) / BM818-A1 on a [M.2 3042](https://media.ccc.de/v/Camp2019-10238-a_mobile_phone_that_respects_your_freedom) [E-key](https://forums.puri.sm/t/news-regarding-librem5-on-chaos-communication-camp-2019/6813/4) card (via USB 2.0 and I2S)
|
|
|
|
|
|
* Silicon Labs (formerly Redpine Signals) [RS9116](https://www.silabs.com/wireless/wi-fi/rs9116-wi-fi-transceiver-modules) 802.11 a/b/g/n 2.4 & 5 GHz via [SDIO 2.0 ](https://puri.sm/posts/how-we-designed-the-librem-5-dev-kit-with-100-free-software/) on a [M.2 2230](https://media.ccc.de/v/Camp2019-10238-a_mobile_phone_that_respects_your_freedom) [B key](https://forums.puri.sm/t/news-regarding-librem5-on-chaos-communication-camp-2019/6813/4) card; LGA (unclear which module size is being used).<br>**_Note:_** The schematics (p.15) say "Bluetooth 4.1", but the RS9116 supports Bluetooth 5.0. However, only Bluetooth 4 [has been tested](https://forums.puri.sm/t/comparing-specs-of-upcoming-linux-phones/6827/106) so far.
|
|
|
|
|
|
* Zhongshan Tianmo Battery Co. [1lCP10/55/47](https://puri.sm/posts/librem-5-dogwood-update-3/) 3600mAh 3.8V 13.68Wh li-ion polymer battery, 62g (for Dogwood)
|
|
|
|
|
|
* Zhongshan Tianmao Battery Co. [1ICP10/57/53](https://forums.puri.sm/t/liberm-5-weight-handling/3439/10) 4500mAh 3.8V 17.1Wh li-ion polymer battery, 75g (for Evergreen)
|
|
|
|
|
|
* Goodix [GT5688](http://www.5raa.com/content/92.html) Touch IC
|
|
|
|
|
|
* Mantix [MLAF057WE51 X](https://www.lcds-center.com/18036250-MLAF057WE51%20X.pdf) 5.7″ IPS [a-Si](https://www.androidauthority.com/amorphous-igzo-and-beyond-399778/) LCD, 720×1440 pixels, 16.7M colors, 282 PPI, 1500:1 contrast ratio, 90% sRGB, MIPI DSI.<br>**_Note:_** No mention of hardened glass, but the Librem 5 comes with a plastic screen protector.
|
|
|
|
|
|
* Focaltech [FT8006P](https://source.puri.sm/guido.gunther/linux-imx8/commit/8050342cd93538265918e6858f273e1bc3cf6a1a?expanded=1) LCD controller in the Mantix [MLAF057WE51 X](https://www.lcds-center.com/18036250-MLAF057WE51%20X.pdf) display
|
|
|
|
|
|
* Samsung [S5K3L6XX](https://redmine.replicant.us/projects/replicant/wiki/Librem5Phone) image sensor for back camera, 13.25 MP , CMOS, 1/3", 4224×3136 pixels, 4K@30fps, FHD@60fps, HD@120fps, [f/1.9, 28mm](https://www.gsmarena.com/samsung_galaxy_j4+-9335.php), auto-focus: 10cm - ∞, 81.5° FOV, LED flash<br>(not yet [supported in kernel](https://source.puri.sm/Librem5/linux-next/-/issues/43))<br><br>**_Note:_** The [Samsung S5K3L6XX is used](http://deviceinfohw.ru/devices/item.php?item=60962) in the [Galaxy J4+](https://www.gsmarena.com/samsung_galaxy_j4+-9335.php), which takes decent photos according this [review](https://www.expertreviews.co.uk/samsung/1408991/samsung-galaxy-j4-plus-review-budget-smartphone), but it has the Snapdragon 425 (4x 1.4GHz Cortex-A53, 28nm) which is comparable in CPU power to the i.MX 8M Quad and the J4+’s highest resolution video is 1080p at 30fps. The Samsung 13MP image sensor in the Librem 5 is capable of capturing 4K video at 30fps, but the i.MX 8M Quad has no hardware video encoder and its documentation indicates that it is only capable of encoding 1080p video at 30fps in software. There is currently no kernel support for the [front](https://source.puri.sm/Librem5/linux-next/-/issues/44) and [back](https://source.puri.sm/Librem5/linux-next/-/issues/43) cameras and there is only a [mockup](https://gitlab.gnome.org/Teams/Design/app-mockups/commit/91830ed0c2929bec14a05792db5ab3629afe6f46) of a [future camara app](https://www.omgubuntu.co.uk/2020/02/gnome-camera-app-mockup) for the Librem 5.
|
|
|
## Components in the WiFi/Bluetooth M.2 board
|
|
|
|
|
|
* SK hynix [YACG4D0C9SHC](https://redmine.replicant.us/projects/replicant/wiki/Librem5Phone) image sensor for front camera, 8.0 MP, CMOS, 1/4", 3264×2448 pixels, QUXGA@30fps, FHD@60fps (crop), HD@90fps, focusing range: 28.9-65.0cm, 83.3° FOV<br>(not yet [supported in kernel](https://source.puri.sm/Librem5/linux-next/-/issues/44))<br>
|
|
|
Purism hasn't published the schematics for the M.2 2230 B-key card containing the Silicon Labs (formerly Redpine Signals) [RS9116](https://www.silabs.com/wireless/wi-fi/rs9116-wi-fi-transceiver-modules) WiFi/Bluetooth chip. This card is assembled by Silicon Labs [in Hyderabad, India](https://puri.sm/products/librem-5-usa/) and contains the following ICs:
|
|
|
|
|
|
## Components in the WiFi/Bluetooth M.2 board
|
|
|
* Silicon Labs [RS9116N-DB00-CC0](https://www.silabs.com/wireless/wi-fi/rs9116-wi-fi-transceiver-modules/device.rs9116n-db00-cc0) dual band (2.4 & 5 GHz) WiFi 802.11 b/g/n, 802.11j, dual-mode Bluetooth 5, LGA-173, 9.1 x 9.8 x 1.6 mm, [data sheet](https://www.silabs.com/documents/login/data-sheets/rs9116-cc0-connectivity-module-datasheet.pdf)<br>**_Note:_** The schematics (p.15) say "Bluetooth 4.1", but the RS9116 supports Bluetooth 5.0. However, only Bluetooth 4 [has been tested]
|
|
|
|
|
|
Purism hasn't published the schematics for the M.2 2230 B-key card containing the Silicon Labs (formerly Redpine Signals) [RS9116](https://www.silabs.com/wireless/wi-fi/rs9116-wi-fi-transceiver-modules) WiFi/Bluetooth chip.
|
|
|
* TI [LSF0108](https://www.ti.com/lit/ds/symlink/lsf0108.pdf) Eight channel auto-bidirectional multi-voltage level translator for open-drain and push-pull applications, VQFN-20, 4.50 × 2.50 mm
|
|
|
|
|
|
[Front](https://forums.puri.sm/t/can-someone-post-high-resolution-photos-of-the-l5s-m-2-cards/13582/10) of the RS9116 WiFi/BT M.2 card (50 components):
|
|
|
![Front of RS9116 WiFi M.2 card](uploads/9703a5c8be3985e9b452d323c26c1015/Front_Redpine_WiFi_M.2_card.jpg)
|
... | ... | @@ -328,10 +313,11 @@ Purism hasn't published the schematics for the M.2 2230 B-key card containing th |
|
|
[Back](https://forums.puri.sm/t/can-someone-post-high-resolution-photos-of-the-l5s-m-2-cards/13582/10) of the RS9116 WiFi/BT M.2 card (37 components):
|
|
|
![Back of RS9116 WiFi/BT M.2 card](uploads/a8739f35b2220db0ad0b093ab5fac9e2/Back_Redpine_WiFi_M.2_card.jpg)
|
|
|
|
|
|
## Components in the cellular modem M.2 boards
|
|
|
|
|
|
## Components in the BM818 modem M.2 board
|
|
|
Purism hasn't published the schematics for any of the [M.2 3042](https://media.ccc.de/v/Camp2019-10238-a_mobile_phone_that_respects_your_freedom) [E-key](https://forums.puri.sm/t/news-regarding-librem5-on-chaos-communication-camp-2019/6813/4) cards (via USB 2.0 and I<sup>2</sup>S).
|
|
|
|
|
|
Purism hasn't published the schematics for the [M.2 3042](https://media.ccc.de/v/Camp2019-10238-a_mobile_phone_that_respects_your_freedom) [E-key](https://forums.puri.sm/t/news-regarding-librem5-on-chaos-communication-camp-2019/6813/4) card containing the BroadMobi [BM818-E1](http://www.broadmobi.com/en/module_show.php?id=18) / BM818-A1.
|
|
|
The M.2 cards containing the BroadMobi [BM818-E1](http://www.broadmobi.com/en/module_show.php?id=18) / BM818-A1 / BM818-T1 are made by BroadMobi in China ([spec sheet](https://p.globalsources.com/IMAGES/PDT/SPEC/593/K1172549593.pdf), [FCC info](https://fccid.io/2AON8-BM818/User-Manual/BM818-Coperation-manual-V1-4-4107101)). Purism is making [in house](https://puri.sm/posts/manufacturing-the-librem-5-usa-phone-in-the-united-states-of-america/) the M.2 cards with the Thales Cinterion [PLS8-E](https://www.thalesgroup.com/en/markets/digital-identity-and-security/iot/iot-connectivity/products/iot-products/pls8-e-high-speed) / [PLS8-US](https://www.thalesgroup.com/en/markets/digital-identity-and-security/iot/iot-connectivity/products/iot-products/pls8-us-high-speed) modems.
|
|
|
|
|
|
[Front](https://forums.puri.sm/t/try-and-error-opening-librem-5-pictures/12517) of the BM818-E1 cellular modem (6 components):
|
|
|
![Front of the BM818-E1 cellular modem](uploads/86383b338b1266ca34af924578b671e8/Front_BM818-E1_cellular_modem.jpg)
|
... | ... | @@ -342,6 +328,24 @@ Purism hasn't published the schematics for the [M.2 3042](https://media.ccc.de/v |
|
|
[Back](https://forums.puri.sm/t/can-someone-post-high-resolution-photos-of-the-l5s-m-2-cards/13582/10) of the BM818 cellular modem:
|
|
|
![Back of the BM818 cellular modem](uploads/156663d103f70ae22922eadacf1a1384/Back_BM818_cellular_modem.jpg)
|
|
|
|
|
|
## Other components in the Librem 5
|
|
|
|
|
|
The Librem 5 contains the following components, which aren't placed on one the four PCBs (main PCB, USB PCB, WiFi/BT M.2 card or cellular modem M.2 card):
|
|
|
|
|
|
* Zhongshan Tianmo Battery Co. [1lCP10/55/47](https://puri.sm/posts/librem-5-dogwood-update-3/) 3600mAh 3.8V 13.68Wh li-ion polymer battery, 62g (for Dogwood)
|
|
|
|
|
|
* Zhongshan Tianmao Battery Co. [1ICP10/57/53](https://forums.puri.sm/t/liberm-5-weight-handling/3439/10) 4500mAh 3.8V 17.1Wh li-ion polymer battery, 75g (for Evergreen)
|
|
|
|
|
|
* Goodix [GT5688](http://www.5raa.com/content/92.html) Touch IC
|
|
|
|
|
|
* Mantix [MLAF057WE51 X](https://www.lcds-center.com/18036250-MLAF057WE51%20X.pdf) 5.7″ IPS [a-Si](https://www.androidauthority.com/amorphous-igzo-and-beyond-399778/) LCD, 720×1440 pixels, 16.7M colors, 282 PPI, 1500:1 contrast ratio, 90% sRGB, MIPI DSI.<br>**_Note:_** No mention of hardened glass, but the Librem 5 comes with a plastic screen protector.
|
|
|
|
|
|
* Focaltech [FT8006P](https://source.puri.sm/guido.gunther/linux-imx8/commit/8050342cd93538265918e6858f273e1bc3cf6a1a?expanded=1) LCD controller in the Mantix [MLAF057WE51 X](https://www.lcds-center.com/18036250-MLAF057WE51%20X.pdf) display
|
|
|
|
|
|
* Samsung [S5K3L6XX](https://redmine.replicant.us/projects/replicant/wiki/Librem5Phone) image sensor for back camera, 13.25 MP , CMOS, 1/3", 4224×3136 pixels, 4K@30fps, FHD@60fps, HD@120fps, [f/1.9, 28mm](https://www.gsmarena.com/samsung_galaxy_j4+-9335.php), auto-focus: 10cm - ∞, 81.5° FOV, LED flash<br>(not yet [supported in kernel](https://source.puri.sm/Librem5/linux-next/-/issues/43))<br><br>**_Note:_** The [Samsung S5K3L6XX is used](http://deviceinfohw.ru/devices/item.php?item=60962) in the [Galaxy J4+](https://www.gsmarena.com/samsung_galaxy_j4+-9335.php), which takes decent photos according this [review](https://www.expertreviews.co.uk/samsung/1408991/samsung-galaxy-j4-plus-review-budget-smartphone), but it has the Snapdragon 425 (4x 1.4GHz Cortex-A53, 28nm) which is comparable in CPU power to the i.MX 8M Quad and the J4+’s highest resolution video is 1080p at 30fps. The Samsung 13MP image sensor in the Librem 5 is capable of capturing 4K video at 30fps, but the i.MX 8M Quad has no hardware video encoder and its documentation indicates that it is only capable of encoding 1080p video at 30fps in software. There is currently no kernel support for the [front](https://source.puri.sm/Librem5/linux-next/-/issues/44) and [back](https://source.puri.sm/Librem5/linux-next/-/issues/43) cameras and there is only a [mockup](https://gitlab.gnome.org/Teams/Design/app-mockups/commit/91830ed0c2929bec14a05792db5ab3629afe6f46) of a [future camara app](https://www.omgubuntu.co.uk/2020/02/gnome-camera-app-mockup) for the Librem 5.
|
|
|
|
|
|
* SK hynix [YACG4D0C9SHC](https://redmine.replicant.us/projects/replicant/wiki/Librem5Phone) image sensor for front camera, 8.0 MP, CMOS, 1/4", 3264×2448 pixels, QUXGA@30fps, FHD@60fps (crop), HD@90fps, focusing range: 28.9-65.0cm, 83.3° FOV<br>(not yet [supported in kernel](https://source.puri.sm/Librem5/linux-next/-/issues/44))<br>
|
|
|
|
|
|
|
|
|
## Components whose manufacturer is unknown
|
|
|
|
... | ... | |